Sprayed polyurethane foam insulation MARCON SPRAY PROF (12 x 0.8ml)
Sprayed polyurethane foam insulation MARCON SPRAY PROF (12 x 0.8ml)
Advantages:
• Rapid insulation of large surfaces
• Seamless sealing, noise and thermal insulation
• Closed cellular structure – low moisture absorption
and vapor permeability
• Convenient for insulation of complex surfaces in hard-to-reach places
• Does not require additional tools, equipment or installation
• It is economical and convenient to use, both in domestic and professional use
• The kit includes a nozzle that forms a uniform seamless
thermal insulation layer on almost any surface
• After complete polymerization, the insulation surface can be
painted and plastered (light plasters, except CPS)
Features:
Product, designed specifically for fast insulation of large surface areas, regardless of the complexity of their geometric shapes.
• High thermal insulation properties, low values of vapor permeability and water absorption, convenience and purity of application of the sprayed insulation allow it to be an excellent alternative to standard sheet insulation (mineral wool, expanded polystyrene, foam and other products).
Features:
Smell: Light specific smell, has no smell in the solidified state
Color: Light beige with a yellowish tinge
Shelf life: 12 months
Application temperature: From +10°C to +35°C
Storage temperature range: From +5°C to +35°C
Temperature mode of transportation: -20°C to +35°C
Foam density: TM 1019:2014 Up to 15 kg/m3*
Formation time of non-sticky surface film: TM 1014:2013 5-6 min.*
Application time between the first and each subsequent layer*** : 2-3 min*
Distance from the spray nozzle to the working surface: 45-55 cm
Full polymerization time: 24 hours
The average thickness of the insulation layer in one application: 15 mm
Insulation area: Up to 2 m2 with an average thickness of 15 mm
Thermal conductivity coefficient: 0.031 W/(m*K)
Heat resistance of the hardened foam: From -55°C to +90°C, short-term to +120°C
* At 20°C and rel. humidity 65% **At 23°C and rel. humidity 50% ***Preliminary
moistening of the surface is mandatory
Purpose:
Seamless sealing, heat and noise insulation of large surfaces: foundations,
load-bearing walls, attic and basement rooms, interior partitions, balconies and
loggias, pipelines, building frame structures, roofs, -insulation of surfaces
complex geometric shapes in hard-to-reach places.
Before using:
Withstand the balloon for at least 12 hours at a temperature of +18 ° C - +23 ° C; shake the balloon vigorously
for 30 seconds; remove the protective cover; screw the gun onto the cross-shaped nozzle with a thread; attach the spray nozzle to the gun; turn the cylinder into the working position "BOTTOM UP"
Application:
Working surfaces should be sufficiently moistened, cleaned of dust and dirt; apply insulation by adjusting the intensity of the output with a gun screw; recommended distance
from the spray nozzle to the working surface is 20-25cm; time "to peel off" 5-6 minutes*;
time of complete polymerization - 24 hours*; repeated application is possible after 2-3 minutes* with
pre-moistening of the surface; the uncured foam insulation is easily removed
with a universal cleaner of MARCON mounting foam or other solvents; the frozen insulation is removed only mechanically; for long-term preservation of the physicomechanical properties of the applied insulation, in order to avoid its destruction, it is necessary
protect the insulation layer from the effects of UV rays and atmospheric precipitation (with specialized sealants, mastics, light plaster solutions, except CPS, etc.); do not apply on
a surface covered with frost or ice, as well as on oiled surfaces;
*data obtained at +23 ° C and 60% humidity.
Composition:
Contains 4,4’ - diphenylmethanediisocyanate, polyol component, hydrocarbon propellant,
dimethyl ether. It does not contain ozone-depleting foaming agents.
The volume of the cylinder is 1000 ml. Filling volume 800 ml.
Disposal:
Do not burn the cylinder (even) empty, do not pierce, do not deform (do not crumple).
Dispose of the used balloon in a garbage container.
Storage and transportation:
Store and transport only in an upright position (with the valve facing up)! Pressure cylinder,
do not open! Do not disassemble the balloon and do not give it to children! Store in a cool, dry place away from heat sources! Protect from direct sunlight and heating above +50 °C!
Storage temperature range: from +5°C to +35 °C.
Temperature mode of transportation: -20°C to +35 °C.
Expiration date:12 months from the date of manufacture (see the production date on the bottom of the cylinder).
Precautions:
Work in a well-ventilated area. In rooms where spraying occurs,
do not smoke, do not use an open fire and spark-generating equipment. Wear protective gloves and goggles before use. The contents of the balloon can cause irritation of the eyes, respiratory organs, skin, allergic reactions. Avoid contact with skin and eyes. In case of contact with
skin, rinse with plenty of water. In case of contact with eyes, rinse immediately with water and consult a doctor. The foaming agent is heavier than air and belongs to combustible substances.
Do not spray near open flames and incandescent objects! FLAMMABLE!
Advantages:
• Rapid insulation of large surfaces
• Seamless sealing, noise and thermal insulation
• Closed cellular structure – low moisture absorption
and vapor permeability
• Convenient for insulation of complex surfaces in hard-to-reach places
• Does not require additional tools, equipment or installation
• It is economical and convenient to use, both in domestic and professional use
• The kit includes a nozzle that forms a uniform seamless
thermal insulation layer on almost any surface
• After complete polymerization, the insulation surface can be
painted and plastered (light plasters, except CPS)
Features:
Product, designed specifically for fast insulation of large surface areas, regardless of the complexity of their geometric shapes.
• High thermal insulation properties, low values of vapor permeability and water absorption, convenience and purity of application of the sprayed insulation allow it to be an excellent alternative to standard sheet insulation (mineral wool, expanded polystyrene, foam and other products).
Features:
Smell: Light specific smell, has no smell in the solidified state
Color: Light beige with a yellowish tinge
Shelf life: 12 months
Application temperature: From +10°C to +35°C
Storage temperature range: From +5°C to +35°C
Temperature mode of transportation: -20°C to +35°C
Foam density: TM 1019:2014 Up to 15 kg/m3*
Formation time of non-sticky surface film: TM 1014:2013 5-6 min.*
Application time between the first and each subsequent layer*** : 2-3 min*
Distance from the spray nozzle to the working surface: 45-55 cm
Full polymerization time: 24 hours
The average thickness of the insulation layer in one application: 15 mm
Insulation area: Up to 2 m2 with an average thickness of 15 mm
Thermal conductivity coefficient: 0.031 W/(m*K)
Heat resistance of the hardened foam: From -55°C to +90°C, short-term to +120°C
* At 20°C and rel. humidity 65% **At 23°C and rel. humidity 50% ***Preliminary
moistening of the surface is mandatory
Purpose:
Seamless sealing, heat and noise insulation of large surfaces: foundations,
load-bearing walls, attic and basement rooms, interior partitions, balconies and
loggias, pipelines, building frame structures, roofs, -insulation of surfaces
complex geometric shapes in hard-to-reach places.
Before using:
Withstand the balloon for at least 12 hours at a temperature of +18 ° C - +23 ° C; shake the balloon vigorously
for 30 seconds; remove the protective cover; screw the gun onto the cross-shaped nozzle with a thread; attach the spray nozzle to the gun; turn the cylinder into the working position "BOTTOM UP"
Application:
Working surfaces should be sufficiently moistened, cleaned of dust and dirt; apply insulation by adjusting the intensity of the output with a gun screw; recommended distance
from the spray nozzle to the working surface is 20-25cm; time "to peel off" 5-6 minutes*;
time of complete polymerization - 24 hours*; repeated application is possible after 2-3 minutes* with
pre-moistening of the surface; the uncured foam insulation is easily removed
with a universal cleaner of MARCON mounting foam or other solvents; the frozen insulation is removed only mechanically; for long-term preservation of the physicomechanical properties of the applied insulation, in order to avoid its destruction, it is necessary
protect the insulation layer from the effects of UV rays and atmospheric precipitation (with specialized sealants, mastics, light plaster solutions, except CPS, etc.); do not apply on
a surface covered with frost or ice, as well as on oiled surfaces;
*data obtained at +23 ° C and 60% humidity.
Composition:
Contains 4,4’ - diphenylmethanediisocyanate, polyol component, hydrocarbon propellant,
dimethyl ether. It does not contain ozone-depleting foaming agents.
The volume of the cylinder is 1000 ml. Filling volume 800 ml.
Disposal:
Do not burn the cylinder (even) empty, do not pierce, do not deform (do not crumple).
Dispose of the used balloon in a garbage container.
Storage and transportation:
Store and transport only in an upright position (with the valve facing up)! Pressure cylinder,
do not open! Do not disassemble the balloon and do not give it to children! Store in a cool, dry place away from heat sources! Protect from direct sunlight and heating above +50 °C!
Storage temperature range: from +5°C to +35 °C.
Temperature mode of transportation: -20°C to +35 °C.
Expiration date:12 months from the date of manufacture (see the production date on the bottom of the cylinder).
Precautions:
Work in a well-ventilated area. In rooms where spraying occurs,
do not smoke, do not use an open fire and spark-generating equipment. Wear protective gloves and goggles before use. The contents of the balloon can cause irritation of the eyes, respiratory organs, skin, allergic reactions. Avoid contact with skin and eyes. In case of contact with
skin, rinse with plenty of water. In case of contact with eyes, rinse immediately with water and consult a doctor. The foaming agent is heavier than air and belongs to combustible substances.
Do not spray near open flames and incandescent objects! FLAMMABLE!
No reviews found