Mounting foam MARCON PRO GREEN FOAM 70+ universal pistol (12 x 880ml)
Mounting foam MARCON PRO GREEN FOAM 70+ universal pistol (12 x 880ml)
Foam, which was created specifically for Russian conditions, taking into account the wishes of
customers and all the long-term developments in the field of polyurethanes by MARCON
Advantages:
• Stable polymerization at temperature differences
• Maximum filling and increased yield
• Increased density and uniform structure
• Accurate dosage and easy baking under any conditions
• Increased adhesion to porous and "complex" materials
Features:
• Foam, developed based on the wishes of customers.
• Foam that cannot be confused*
• Foam created specifically for year-round conditions
use.
*The foam is equipped with a special color quality marker. After baking and polymerization, the finished product acquires a light green color, which makes it easy to distinguish the authenticity of the product, and not to confuse it with other brands in the conditions of construction, repair and installation.
Features:
Odor: Light specific odor, has no odor in the solidified state
Color: Light beige with a greenish tinge
Shelf life: 18 months
Application Temperature: -14°C to +35°C
Storage temperature range: From +5°C to +35°C
Temperature mode of transportation: -20°C to +35°C
Composition: 4,4’ - diphenylmethanediisocyanate, polyol component, hydrocarbon propellant, dimethyl ether
Cylinder volume/filling volume 1000 ml/880 ml
Foam density: TM 1019:2014 18-20 kg/m3*
Formation time of non-sticky surface film: TM 1014:2013 8-9 min.*
Time to start pruning: TM 1005-2013 30 min*
Full polymerization time: 24 hours
Secondary Expansion: TM 1010-2016 Max. 30 %**
Output per package: TM 1003-2013 Up to 70 l**
Heat resistance of the hardened foam: From -55°C to +90°C, short-term to +120°C
* At 20°C and rel. humidity 65% **At 23°C and rel. humidity 50%
Purpose:
Installation and sealing of window and door blocks; filling, sealing, sealing of holes, cracks and voids; fixing and insulation of pipes, technical and engineering communications;installation and sealing of wall panels, slopes, window sills; sealing, heat and noise insulation of premises, building and frame structures.
Before using:
- withstand the cylinder for at least 12 hours at a temperature of +18 ° C - +20 ° C;
- shake the cylinder vigorously for 30 seconds;
- remove the protective cover;
- screw the gun onto the cross-shaped nozzle with a thread;
Application:
Work surfaces should be sufficiently moistened, cleaned of dust and dirt; apply foam, adjusting the intensity of the output with the screw of the gun; the time of complete polymerization
depends on environmental conditions and is at least 4-6 hours with a seam width of 30mm
and a depth of 60mm; primary expansion - 70%, secondary - 30%; uncured foam is easily removed
by MARCON universal foam cleaner or other solvents;
frozen foam is removed only mechanically; for long-term preservation of the physical and mechanical properties of the foam, in order to avoid its destruction, it is necessary to protect the foam
from the effects of UV rays and precipitation (with PSUL tapes, waterproofing tapes, specialized sealants, mastics, plaster solutions, etc.); do not apply
/>on a surface covered with frost or ice. It is forbidden to heat the aerosol can above +50°C!
Composition:
Contains 4,4’ - diphenylmethanediisocyanate, polyol component, hydrocarbon propellant,
dimethyl ether. It does not contain ozone-depleting foaming agents. The volume of the cylinder is 1000 ml.
The filling volume is 880 ml.
Disposal:
Do not burn the cylinder (even) empty, do not pierce, do not deform (do not crumple).
Dispose of the used balloon in a garbage container.
Storage and transportation:
Store and transport only in an upright position (with the valve facing up)! Pressure cylinder,
do not open! Do not disassemble the balloon and do not give it to children! Store in a cool, dry place away from heat sources! Protect from direct sunlight and heating above
+50°C!
Expiration date:
18 months from the date of manufacture (see the production date on the bottom of the cylinder).
Precautions:
Work in a well-ventilated area. In rooms where spraying occurs,
do not smoke, do not use an open fire and spark-generating equipment. Wear protective gloves and goggles before use. The contents of the balloon can cause irritation of the eyes, respiratory organs, skin, allergic reactions. Avoid contact with skin and eyes. In case of contact with
skin, rinse with plenty of water. In case of contact with eyes, rinse immediately with water and consult a doctor. The foaming agent is heavier than air and belongs to combustible substances.
Do not spray near open flames and incandescent objects! FLAMMABLE!
Foam, which was created specifically for Russian conditions, taking into account the wishes of
customers and all the long-term developments in the field of polyurethanes by MARCON
Advantages:
• Stable polymerization at temperature differences
• Maximum filling and increased yield
• Increased density and uniform structure
• Accurate dosage and easy baking under any conditions
• Increased adhesion to porous and "complex" materials
Features:
• Foam, developed based on the wishes of customers.
• Foam that cannot be confused*
• Foam created specifically for year-round conditions
use.
*The foam is equipped with a special color quality marker. After baking and polymerization, the finished product acquires a light green color, which makes it easy to distinguish the authenticity of the product, and not to confuse it with other brands in the conditions of construction, repair and installation.
Features:
Odor: Light specific odor, has no odor in the solidified state
Color: Light beige with a greenish tinge
Shelf life: 18 months
Application Temperature: -14°C to +35°C
Storage temperature range: From +5°C to +35°C
Temperature mode of transportation: -20°C to +35°C
Composition: 4,4’ - diphenylmethanediisocyanate, polyol component, hydrocarbon propellant, dimethyl ether
Cylinder volume/filling volume 1000 ml/880 ml
Foam density: TM 1019:2014 18-20 kg/m3*
Formation time of non-sticky surface film: TM 1014:2013 8-9 min.*
Time to start pruning: TM 1005-2013 30 min*
Full polymerization time: 24 hours
Secondary Expansion: TM 1010-2016 Max. 30 %**
Output per package: TM 1003-2013 Up to 70 l**
Heat resistance of the hardened foam: From -55°C to +90°C, short-term to +120°C
* At 20°C and rel. humidity 65% **At 23°C and rel. humidity 50%
Purpose:
Installation and sealing of window and door blocks; filling, sealing, sealing of holes, cracks and voids; fixing and insulation of pipes, technical and engineering communications;installation and sealing of wall panels, slopes, window sills; sealing, heat and noise insulation of premises, building and frame structures.
Before using:
- withstand the cylinder for at least 12 hours at a temperature of +18 ° C - +20 ° C;
- shake the cylinder vigorously for 30 seconds;
- remove the protective cover;
- screw the gun onto the cross-shaped nozzle with a thread;
Application:
Work surfaces should be sufficiently moistened, cleaned of dust and dirt; apply foam, adjusting the intensity of the output with the screw of the gun; the time of complete polymerization
depends on environmental conditions and is at least 4-6 hours with a seam width of 30mm
and a depth of 60mm; primary expansion - 70%, secondary - 30%; uncured foam is easily removed
by MARCON universal foam cleaner or other solvents;
frozen foam is removed only mechanically; for long-term preservation of the physical and mechanical properties of the foam, in order to avoid its destruction, it is necessary to protect the foam
from the effects of UV rays and precipitation (with PSUL tapes, waterproofing tapes, specialized sealants, mastics, plaster solutions, etc.); do not apply
/>on a surface covered with frost or ice. It is forbidden to heat the aerosol can above +50°C!
Composition:
Contains 4,4’ - diphenylmethanediisocyanate, polyol component, hydrocarbon propellant,
dimethyl ether. It does not contain ozone-depleting foaming agents. The volume of the cylinder is 1000 ml.
The filling volume is 880 ml.
Disposal:
Do not burn the cylinder (even) empty, do not pierce, do not deform (do not crumple).
Dispose of the used balloon in a garbage container.
Storage and transportation:
Store and transport only in an upright position (with the valve facing up)! Pressure cylinder,
do not open! Do not disassemble the balloon and do not give it to children! Store in a cool, dry place away from heat sources! Protect from direct sunlight and heating above
+50°C!
Expiration date:
18 months from the date of manufacture (see the production date on the bottom of the cylinder).
Precautions:
Work in a well-ventilated area. In rooms where spraying occurs,
do not smoke, do not use an open fire and spark-generating equipment. Wear protective gloves and goggles before use. The contents of the balloon can cause irritation of the eyes, respiratory organs, skin, allergic reactions. Avoid contact with skin and eyes. In case of contact with
skin, rinse with plenty of water. In case of contact with eyes, rinse immediately with water and consult a doctor. The foaming agent is heavier than air and belongs to combustible substances.
Do not spray near open flames and incandescent objects! FLAMMABLE!
Brand
Marcon
Product Type
пена профессиональная
Type of foam
универсальная
Valve
under the gun
No reviews found