Mounting foam MARCON PRO flame-resistant pistol (12 x 0.81l)
Mounting foam MARCON PRO flame-resistant pistol (12 x 0.81l)
Features:
• Tested for fire resistance in accordance with the requirements of GOST
30247.0-94 and GOST 30247.1-94.***
• The fire resistance limit EI 15 - EI 180 at different depths and widths
of filling seams. Complies with fire safety requirements.***
• The fire resistance limit of the cured fire-resistant foam is confirmed
Certificate of conformity NSOPB.RU.EO.PR150.N.01381.***
Seam depth, mm. Seam thickness, mm.
10 20 30 40 60
60 EL 45 EL 45 EL 30 EL 30
100 EL 60 EL 60 EL 45 EL 45 EL 15
200 EL 180 EL 15 EL 120 EL 90 EL 60
***Voluntary certification according to GOST 30247.0-94 and GOST 302447.1-94 was carried out and a certificate for the fire resistance of the product was obtained
Professional mounting foam
MARCON (fire-resistant):
*** Certificate of compliance with NSOPB requirements SNiP21-01-97, clause 5.13 GOST 30247.0-94,
GOST.1-94 (fire-resistant)
Appendix to the certificate of conformity of the NSOPB to the requirements of SNiP21-01-97, p. 5.13 GOST
30247.0-94, GOST.1-94 (fire-resistant)
Features:
Odor: Light specific odor, has no odor in the solidified state
Color: Pink
Shelf life: 18 months
Application temperature: From +5°C to +30°C
Storage temperature range: From +5°C to +35°C
Temperature mode of transportation: -20°C to +35°C
Foam density: TM 1019:2014 27.2kg/m3*
Time of formation of non-sticky surface film: TM 1014:2013 4-5 min.*
Time to start pruning: TM 1005-2013 22 min*
Full polymerization time: 24 hours
Secondary expansion: Max. 40 %**
Output per package: TM 1003-2013 55 L**
Heat resistance of the hardened foam: From -55°C to +90°C, short-term to +120°C
* At 20°C and rel. humidity 65% **At 23°C and rel. humidity 50%
Purpose:
Installation and sealing of window and door blocks; filling, sealing, sealing of holes, cracks and voids; fixing and insulation of pipes, technical and engineering communications;installation and sealing of wall panels, slopes, window sills; sealing, heat and noise insulation of premises, building and frame structures.
Before using:
- withstand the cylinder for at least 12 hours at a temperature of +18 ° C - +20 ° C;
- shake the cylinder vigorously for 30 seconds;
- remove the protective cover;
- screw the gun onto the cross-shaped nozzle with a thread;
- turn the cylinder to the working position "BOTTOM UP"
Application:
Work surfaces should be sufficiently moistened, cleaned of dust and dirt; apply foam, adjusting the intensity of the output with the screw of the gun; the time of complete polymerization depends on
environmental conditions and is at least 4-6 hours with a seam width of 30 mm and a depth of 60 mm;
primary expansion - 70%, secondary - 30%; uncured foam is easily removed by a universal
MARCON mounting foam cleaner or other solvents; frozen foam is removed
only mechanically; to preserve the physical and mechanical properties of the foam for a long time,
in order to avoid its destruction, it is necessary to protect the foam from UV rays and atmospheric precipitation (with PSUL tapes, waterproofing tapes, specialized sealants,
mastics, plaster solutions, etc.); do not apply to the surface, covered with frost or ice.
It is forbidden to heat the aerosol can above +50 °C!
Composition:
Contains 4,4’ - diphenylmethanediisocyanate, polyol component, hydrocarbon propellant,
dimethyl ether. It does not contain ozone-depleting foaming agents. The volume of the cylinder is 1000 ml.
The filling volume is 810 ml.
Disposal:
Do not burn the cylinder (even) empty, do not pierce, do not deform (do not crumple).
Dispose of the used balloon in a garbage container.
Storage and transportation:
Store and transport only in an upright position (with the valve facing up)! The cylinder is under
pressure, do not open it! Do not disassemble the balloon and do not give it to children! Store in a cool, dry place
away from heat sources! Protect from direct sunlight and heating above
+50°C! Storage temperature range: from +5°C to +35 °C. Temperature mode of transportation:
-20°C to +35°C.
Expiration date:
18 months from the date of manufacture (see the production date on the bottom of the cylinder).
Precautions:
Work in a well-ventilated area. In rooms where spraying occurs,
do not smoke, do not use an open fire and spark-generating equipment. Wear protective gloves and goggles before use. The contents of the balloon can cause irritation of the eyes, respiratory organs, skin, allergic reactions. Avoid contact with skin and eyes. In case of contact with
skin, rinse with plenty of water. In case of contact with eyes, rinse immediately with water and consult a doctor. The foaming agent is heavier than air and belongs to combustible substances.
Do not spray near open flames and incandescent objects! FLAMMABLE!
Features:
• Tested for fire resistance in accordance with the requirements of GOST
30247.0-94 and GOST 30247.1-94.***
• The fire resistance limit EI 15 - EI 180 at different depths and widths
of filling seams. Complies with fire safety requirements.***
• The fire resistance limit of the cured fire-resistant foam is confirmed
Certificate of conformity NSOPB.RU.EO.PR150.N.01381.***
Seam depth, mm. Seam thickness, mm.
10 20 30 40 60
60 EL 45 EL 45 EL 30 EL 30
100 EL 60 EL 60 EL 45 EL 45 EL 15
200 EL 180 EL 15 EL 120 EL 90 EL 60
***Voluntary certification according to GOST 30247.0-94 and GOST 302447.1-94 was carried out and a certificate for the fire resistance of the product was obtained
Professional mounting foam
MARCON (fire-resistant):
*** Certificate of compliance with NSOPB requirements SNiP21-01-97, clause 5.13 GOST 30247.0-94,
GOST.1-94 (fire-resistant)
Appendix to the certificate of conformity of the NSOPB to the requirements of SNiP21-01-97, p. 5.13 GOST
30247.0-94, GOST.1-94 (fire-resistant)
Features:
Odor: Light specific odor, has no odor in the solidified state
Color: Pink
Shelf life: 18 months
Application temperature: From +5°C to +30°C
Storage temperature range: From +5°C to +35°C
Temperature mode of transportation: -20°C to +35°C
Foam density: TM 1019:2014 27.2kg/m3*
Time of formation of non-sticky surface film: TM 1014:2013 4-5 min.*
Time to start pruning: TM 1005-2013 22 min*
Full polymerization time: 24 hours
Secondary expansion: Max. 40 %**
Output per package: TM 1003-2013 55 L**
Heat resistance of the hardened foam: From -55°C to +90°C, short-term to +120°C
* At 20°C and rel. humidity 65% **At 23°C and rel. humidity 50%
Purpose:
Installation and sealing of window and door blocks; filling, sealing, sealing of holes, cracks and voids; fixing and insulation of pipes, technical and engineering communications;installation and sealing of wall panels, slopes, window sills; sealing, heat and noise insulation of premises, building and frame structures.
Before using:
- withstand the cylinder for at least 12 hours at a temperature of +18 ° C - +20 ° C;
- shake the cylinder vigorously for 30 seconds;
- remove the protective cover;
- screw the gun onto the cross-shaped nozzle with a thread;
- turn the cylinder to the working position "BOTTOM UP"
Application:
Work surfaces should be sufficiently moistened, cleaned of dust and dirt; apply foam, adjusting the intensity of the output with the screw of the gun; the time of complete polymerization depends on
environmental conditions and is at least 4-6 hours with a seam width of 30 mm and a depth of 60 mm;
primary expansion - 70%, secondary - 30%; uncured foam is easily removed by a universal
MARCON mounting foam cleaner or other solvents; frozen foam is removed
only mechanically; to preserve the physical and mechanical properties of the foam for a long time,
in order to avoid its destruction, it is necessary to protect the foam from UV rays and atmospheric precipitation (with PSUL tapes, waterproofing tapes, specialized sealants,
mastics, plaster solutions, etc.); do not apply to the surface, covered with frost or ice.
It is forbidden to heat the aerosol can above +50 °C!
Composition:
Contains 4,4’ - diphenylmethanediisocyanate, polyol component, hydrocarbon propellant,
dimethyl ether. It does not contain ozone-depleting foaming agents. The volume of the cylinder is 1000 ml.
The filling volume is 810 ml.
Disposal:
Do not burn the cylinder (even) empty, do not pierce, do not deform (do not crumple).
Dispose of the used balloon in a garbage container.
Storage and transportation:
Store and transport only in an upright position (with the valve facing up)! The cylinder is under
pressure, do not open it! Do not disassemble the balloon and do not give it to children! Store in a cool, dry place
away from heat sources! Protect from direct sunlight and heating above
+50°C! Storage temperature range: from +5°C to +35 °C. Temperature mode of transportation:
-20°C to +35°C.
Expiration date:
18 months from the date of manufacture (see the production date on the bottom of the cylinder).
Precautions:
Work in a well-ventilated area. In rooms where spraying occurs,
do not smoke, do not use an open fire and spark-generating equipment. Wear protective gloves and goggles before use. The contents of the balloon can cause irritation of the eyes, respiratory organs, skin, allergic reactions. Avoid contact with skin and eyes. In case of contact with
skin, rinse with plenty of water. In case of contact with eyes, rinse immediately with water and consult a doctor. The foaming agent is heavier than air and belongs to combustible substances.
Do not spray near open flames and incandescent objects! FLAMMABLE!
Brand
Marcon
Product Type
пена профессиональная
Type of foam
огнестойкая
Valve
under the gun
No reviews found