Герметик силиконовый MASTERSIL MOTOR термостойкий +250С красный (12 х 0,31л)
TECHNICAL SPECIFICATIONS
Application temperature (C°) +5...+40
Film formation time (min) 20
Vulcanization rate of 3 mm in 24 hours
Shore hardness 30
Operating temperature (C°) -40...+250
Density (g/cm cubic) 1.04
SPECIAL FEATURES:
• Without shrinkage
• It is possible to apply the sealant at low (+5 ° C) and at high (+40 ° C) temperatures
• Elastic at low (-40 °C) and high (+250 ° C) temperatures
• Resistant to UV radiation, extreme temperature changes, oils and gasoline.
• Rapidly vulcanizing
• High adhesive strength with non-porous surfaces easy to use
• Resistant to temperatures up to +250 ° C, with short temperature fluctuations up to +275 ° C.
ADHESION AND APPLICATION
Silicone sealant Mastersil Motor heat resistant has a high degree of adhesion without using a primer with most non-porous surfaces: glass, tiles, ceramics, enamel, clinker tiles, metals such as aluminum, steel, zinc and copper, with impregnated, varnished or painted wood; with some types of plastic. Users can also conduct their own experiments due to the variety of materials, especially in the case of plastic. Wide range of applications: for sealing joints exposed to prolonged exposure to high temperatures, as well as movable joints. Ideal for the repair of cars, motorcycles, as well as the construction of stoves and stoves. For sealing of threaded connections of pipelines of cold, hot water supply and heating.
PREPARATION FOR USE
The surfaces on which the sealant will subsequently be applied must be clean, dry and free of any loose materials, dust, dirt, rust, oil or other contaminants. If necessary, clean non-porous surfaces with a solvent and wipe with a clean cotton cloth. Remove the solvent with a clean, dry cloth before it evaporates. it is recommended to cover the areas adjacent to the seam with masking tapes to prevent contamination of the substrate and ensure a neat line of sealant. The masking tape should be removed immediately after smoothing the sealant. The time required for complete vulcanization can be extended at low temperatures, low humidity, increasing the thickness of the film or at low air volume. If possible, the use of processing tools should be avoided. Otherwise, you should use water
or a dilute solution with a small amount of neutral soap or alcohol in water in a moderate volume.
RESTRICTIONS OF USE
• It is not recommended to use it for working with double-glazed windows.
• It is not recommended to use with metals such as lead and brass, due to corrosion.• Incompatible with alkaline substrates such as marble, concrete, fibrous cement and lime, as the product releases acetic acid during vulcanization.
SECURITY
During vulcanization, acetic acid is released. It is not recommended to inhale these vapors for a long time or at their high concentration. It is necessary to ensure proper ventilation of the workplace. If unvulcanized silicone rubber gets into the eyes or mucous membranes, they must be rinsed with water to avoid irritation. Vulcanized silicone rubber is safe for health. keep out of reach of children.
STORAGE
MASTERSIL heat-resistant silicone acid sealant is suitable for at least 12 months when stored in a cool (below 25°C) in a dry place, protected from humidity in the original container. The expiration date of each batch is indicated on the product label. After the expiration date indicated on the package, the product does not necessarily become unusable. However, in this case, it is necessary to check all the properties of the product before using it.
PACKAGING AND COLORS
Cartridge 310 ml
Color: Red
Application temperature (C°) +5...+40
Film formation time (min) 20
Vulcanization rate of 3 mm in 24 hours
Shore hardness 30
Operating temperature (C°) -40...+250
Density (g/cm cubic) 1.04
SPECIAL FEATURES:
• Without shrinkage
• It is possible to apply the sealant at low (+5 ° C) and at high (+40 ° C) temperatures
• Elastic at low (-40 °C) and high (+250 ° C) temperatures
• Resistant to UV radiation, extreme temperature changes, oils and gasoline.
• Rapidly vulcanizing
• High adhesive strength with non-porous surfaces easy to use
• Resistant to temperatures up to +250 ° C, with short temperature fluctuations up to +275 ° C.
ADHESION AND APPLICATION
Silicone sealant Mastersil Motor heat resistant has a high degree of adhesion without using a primer with most non-porous surfaces: glass, tiles, ceramics, enamel, clinker tiles, metals such as aluminum, steel, zinc and copper, with impregnated, varnished or painted wood; with some types of plastic. Users can also conduct their own experiments due to the variety of materials, especially in the case of plastic. Wide range of applications: for sealing joints exposed to prolonged exposure to high temperatures, as well as movable joints. Ideal for the repair of cars, motorcycles, as well as the construction of stoves and stoves. For sealing of threaded connections of pipelines of cold, hot water supply and heating.
PREPARATION FOR USE
The surfaces on which the sealant will subsequently be applied must be clean, dry and free of any loose materials, dust, dirt, rust, oil or other contaminants. If necessary, clean non-porous surfaces with a solvent and wipe with a clean cotton cloth. Remove the solvent with a clean, dry cloth before it evaporates. it is recommended to cover the areas adjacent to the seam with masking tapes to prevent contamination of the substrate and ensure a neat line of sealant. The masking tape should be removed immediately after smoothing the sealant. The time required for complete vulcanization can be extended at low temperatures, low humidity, increasing the thickness of the film or at low air volume. If possible, the use of processing tools should be avoided. Otherwise, you should use water
or a dilute solution with a small amount of neutral soap or alcohol in water in a moderate volume.
RESTRICTIONS OF USE
• It is not recommended to use it for working with double-glazed windows.
• It is not recommended to use with metals such as lead and brass, due to corrosion.• Incompatible with alkaline substrates such as marble, concrete, fibrous cement and lime, as the product releases acetic acid during vulcanization.
SECURITY
During vulcanization, acetic acid is released. It is not recommended to inhale these vapors for a long time or at their high concentration. It is necessary to ensure proper ventilation of the workplace. If unvulcanized silicone rubber gets into the eyes or mucous membranes, they must be rinsed with water to avoid irritation. Vulcanized silicone rubber is safe for health. keep out of reach of children.
STORAGE
MASTERSIL heat-resistant silicone acid sealant is suitable for at least 12 months when stored in a cool (below 25°C) in a dry place, protected from humidity in the original container. The expiration date of each batch is indicated on the product label. After the expiration date indicated on the package, the product does not necessarily become unusable. However, in this case, it is necessary to check all the properties of the product before using it.
PACKAGING AND COLORS
Cartridge 310 ml
Color: Red
No reviews found