Клей монтажный полиуретановый МАСТЕР БЛОК (12 х 750мл)
Adhesive foam for aerated concrete blocks MASTERBLOCK (one-component polyurethane)
Advantages:
• The adhesive is immediately ready for use from the cylinder and completely replaces the adhesive compositions and mixtures.
• A foamed polyurethane foam base with a low coefficient of thermal conductivity avoids cold bridges and freezing along the seam.
• The glue structure guarantees filling even the smallest cracks and voids,
providing high thermal insulation of the building, and increases energy saving.
• Uniform and controlled exit from the cylinder with reduced secondary expansion – allows even inexperienced craftsmen to work with the product.
• The low-pressure formulation ensures the stability of the adhesive layer
and prevents deformation of the surfaces of the finishing coatings.
• Increased adhesive properties for working with porous materials.
• Balloon aerosol packing allows you to avoid excess dust
and additional work that accompanies the preparation of the adhesive
composition of the dry mixture, and make the construction of masonry fast and clean.
• Suitable for working with any standard gun for professional mounting foam, it does not require any additional tools, products and costs.
Features:
• Ideal for working at facilities where rapid construction of structures made of aerated concrete and foam concrete blocks, bricks and other materials used in standard masonry is required.
• Convenient for simple and "clean" construction of masonry works, allows you to avoid cold bridges, removes the need to prepare an additional mixture, does not need
specialized tools
Characteristics:
Smell: Light specific smell, in the solidified state, it has no smell
Color: Light beige/ white with a yellowish tinge
Shelf life: 18 months
Application temperature: From +0°C to +35°C
Storage temperature range: From +5°C to +35°C
Temperature mode of transportation: -20°C to +35°C
Time of formation of non-sticky surface film: TM 1014:2013 5-10 min.*
Correction time: Up to 5 minutes*
Minimum fixing time: 2 hours*
Full polymerization time: 24 hours
Secondary Expansion: TM 1010-2016 Max. 10-20 %**
Heat resistance of the hardened adhesive foam: From -55°C to +90°C, short-term up to +120°C
* At 20°C and rel. humidity 65% **At 23°C and rel. humidity 50%
Purpose:
Designed for gluing aerated concrete blocks, as well as fixing thermal insulation boards
when warming basements, foundations, basement floors, facades of buildings and structures.
Before using:
Withstand the balloon for at least 12 hours at a temperature of +18 ° C - +20 ° C;
Application:
- Shake the cylinder thoroughly for at least 30 seconds;
- Remove the protective cover;
- Screw the gun onto the cross-shaped nozzle with a thread;
- Turn the cylinder into the working position "BOTTOM UP".
- The working position of the cylinder is UPSIDE DOWN.
- Glue is applied to one of the surfaces to be glued.
- Apply glue with a strip about 2-4 cm thick, retreating from the edge of the blocks up to 5 cm.
- After applying the product, press the blocks together.
- The options for applying glue depend on the thickness of the blocks.
- Moistening the surface before applying the glue improves adhesion and accelerates the curing time of the glue.
- Further processing of glued surfaces (sanding, plaster, painting, etc.)
is possible after 60 minutes.
- Cracks and surface irregularities can also be leveled with glue-foam. Excess cured glue
cut off with a sharp tool.
Composition:
Contains 4,4’ - diphenylmethanediisocyanate, polyol component, hydrocarbon propellant,
dimethyl ether. It does not contain ozone-depleting foaming agents. The volume of the cylinder is 1000 ml.
The filling volume is 750 ml.
Disposal:
Do not burn the cylinder (even) empty, do not pierce, do not deform (do not crumple).
Dispose of the used balloon in a garbage container.
Storage and transportation:
Store and transport only in an upright position (with the valve facing up)! Cylinder
under pressure, do not open! Do not disassemble the balloon and do not give it to children! Store in a cool, dry place away from heat sources! Protect from direct sunlight
and heating above +50 °C! Storage temperature range: from +5°C to +35 °C. Temperature
mode of transportation: -20°C to +35°C.
Expiration date:
18 months from the date of manufacture (see the production date on the bottom of the cylinder).
Precautions:
Work in a well-ventilated area. In rooms where spraying occurs,
do not smoke, do not use an open fire and spark-generating equipment. Wear protective gloves and goggles before use. The contents of the balloon can cause irritation of the eyes, respiratory organs, skin, allergic reactions. Avoid contact with skin and eyes. In case of contact with
skin, rinse with plenty of water. In case of contact with eyes, rinse immediately with water and consult a doctor. The foaming agent is heavier than air and belongs to combustible substances.
Do not spray near open flames and incandescent objects! FLAMMABLE!
Advantages:
• The adhesive is immediately ready for use from the cylinder and completely replaces the adhesive compositions and mixtures.
• A foamed polyurethane foam base with a low coefficient of thermal conductivity avoids cold bridges and freezing along the seam.
• The glue structure guarantees filling even the smallest cracks and voids,
providing high thermal insulation of the building, and increases energy saving.
• Uniform and controlled exit from the cylinder with reduced secondary expansion – allows even inexperienced craftsmen to work with the product.
• The low-pressure formulation ensures the stability of the adhesive layer
and prevents deformation of the surfaces of the finishing coatings.
• Increased adhesive properties for working with porous materials.
• Balloon aerosol packing allows you to avoid excess dust
and additional work that accompanies the preparation of the adhesive
composition of the dry mixture, and make the construction of masonry fast and clean.
• Suitable for working with any standard gun for professional mounting foam, it does not require any additional tools, products and costs.
Features:
• Ideal for working at facilities where rapid construction of structures made of aerated concrete and foam concrete blocks, bricks and other materials used in standard masonry is required.
• Convenient for simple and "clean" construction of masonry works, allows you to avoid cold bridges, removes the need to prepare an additional mixture, does not need
specialized tools
Characteristics:
Smell: Light specific smell, in the solidified state, it has no smell
Color: Light beige/ white with a yellowish tinge
Shelf life: 18 months
Application temperature: From +0°C to +35°C
Storage temperature range: From +5°C to +35°C
Temperature mode of transportation: -20°C to +35°C
Time of formation of non-sticky surface film: TM 1014:2013 5-10 min.*
Correction time: Up to 5 minutes*
Minimum fixing time: 2 hours*
Full polymerization time: 24 hours
Secondary Expansion: TM 1010-2016 Max. 10-20 %**
Heat resistance of the hardened adhesive foam: From -55°C to +90°C, short-term up to +120°C
* At 20°C and rel. humidity 65% **At 23°C and rel. humidity 50%
Purpose:
Designed for gluing aerated concrete blocks, as well as fixing thermal insulation boards
when warming basements, foundations, basement floors, facades of buildings and structures.
Before using:
Withstand the balloon for at least 12 hours at a temperature of +18 ° C - +20 ° C;
Application:
- Shake the cylinder thoroughly for at least 30 seconds;
- Remove the protective cover;
- Screw the gun onto the cross-shaped nozzle with a thread;
- Turn the cylinder into the working position "BOTTOM UP".
- The working position of the cylinder is UPSIDE DOWN.
- Glue is applied to one of the surfaces to be glued.
- Apply glue with a strip about 2-4 cm thick, retreating from the edge of the blocks up to 5 cm.
- After applying the product, press the blocks together.
- The options for applying glue depend on the thickness of the blocks.
- Moistening the surface before applying the glue improves adhesion and accelerates the curing time of the glue.
- Further processing of glued surfaces (sanding, plaster, painting, etc.)
is possible after 60 minutes.
- Cracks and surface irregularities can also be leveled with glue-foam. Excess cured glue
cut off with a sharp tool.
Composition:
Contains 4,4’ - diphenylmethanediisocyanate, polyol component, hydrocarbon propellant,
dimethyl ether. It does not contain ozone-depleting foaming agents. The volume of the cylinder is 1000 ml.
The filling volume is 750 ml.
Disposal:
Do not burn the cylinder (even) empty, do not pierce, do not deform (do not crumple).
Dispose of the used balloon in a garbage container.
Storage and transportation:
Store and transport only in an upright position (with the valve facing up)! Cylinder
under pressure, do not open! Do not disassemble the balloon and do not give it to children! Store in a cool, dry place away from heat sources! Protect from direct sunlight
and heating above +50 °C! Storage temperature range: from +5°C to +35 °C. Temperature
mode of transportation: -20°C to +35°C.
Expiration date:
18 months from the date of manufacture (see the production date on the bottom of the cylinder).
Precautions:
Work in a well-ventilated area. In rooms where spraying occurs,
do not smoke, do not use an open fire and spark-generating equipment. Wear protective gloves and goggles before use. The contents of the balloon can cause irritation of the eyes, respiratory organs, skin, allergic reactions. Avoid contact with skin and eyes. In case of contact with
skin, rinse with plenty of water. In case of contact with eyes, rinse immediately with water and consult a doctor. The foaming agent is heavier than air and belongs to combustible substances.
Do not spray near open flames and incandescent objects! FLAMMABLE!
No reviews found