Ключ комбинированный КОБАЛЬТ 13 мм Cr-V
The key is a combined 13 mm COBALT 642-883, designed for unscrewing /screwing small threaded fasteners with hexagon heads in the production of construction, electrical, installation and car service work. It is made according to DIN 3113 standard from Cr50BV30 chrome-vanadium steel, with hardening of working surfaces up to 47-50 HRC. The protective matte chrome coating of the key, applied by electrolytic method, protects against corrosion, improves the appearance, while the key does not slip in the palm of your hand during operation. a universal wrench consisting of two working profiles - a horn and a cap. It is used during locksmith and installation work in production, in auto repair shops and in everyday life.
The key consists of two working profiles - horn and cape, located at an angle of 15 degrees. to the axis of the handle, which allows you to work confidently in hard-to-reach places..
The horn profile is best suited for unscrewing medium and weakly tightened joints, from the side of the threaded connection when it is impossible to use the cap profile of the key or the end head.
The cap profile is an annular twelve√sided working part. The presence of six contact spots allows you to apply increased loads to the fastener without the risk of deformation, but access to the fastener from all sides is required for operation.
The key has excellent strength characteristics, withstanding high torque, and does not change geometry under load. The total length is 170mm. The thickness of the horn profile is 5.8 mm. The thickness of the folding profile is 7.4 mm.
The key consists of two working profiles - horn and cape, located at an angle of 15 degrees. to the axis of the handle, which allows you to work confidently in hard-to-reach places..
The horn profile is best suited for unscrewing medium and weakly tightened joints, from the side of the threaded connection when it is impossible to use the cap profile of the key or the end head.
The cap profile is an annular twelve√sided working part. The presence of six contact spots allows you to apply increased loads to the fastener without the risk of deformation, but access to the fastener from all sides is required for operation.
The key has excellent strength characteristics, withstanding high torque, and does not change geometry under load. The total length is 170mm. The thickness of the horn profile is 5.8 mm. The thickness of the folding profile is 7.4 mm.
No reviews found