Штукатурка гипсовая GLIMS SatiN
Plaster mixture for interior work in dry rooms and rooms with high humidity. It is applied to foam bases- and aerated concrete, gas silicate blocks, masonry made of clinker, ceramic and silicate bricks, porous ceramic blocks, expanded clay and polystyrene concrete blocks, as well as on previously plastered surfaces.
ADVANTAGES
Consumption: 8 kg/m2 with a layer thickness of 10 mm
ADVANTAGES
- For high-quality leveling of walls and ceilings for wallpapering, painting and other types of finishing coatings in dry and wet rooms, and also for the manufacture of decorative elements
- Heat-saving
- Has increased vitality
- Superplastic: easy to apply and level
- Does not need a plaster grid
- Can be used without finishing putty
- With increased crack resistance: does not crack during drying and operation
- Moisture-resistant, can be used for bathrooms and bathrooms
- You can putty or paint after 1-5 days (depending on the thickness of the layer and humidity)
- Environmentally friendly, safe to use and operate
- Maintains a comfortable indoor climate
- Complies with European standards (EN 998-1 class CSII T2)
Brand
Glims
Colour
белый
Weight, kg
30
Adhesion (after 28 days), MPa
0,3
Application thickness (min/max), mm
5-35
Base (binder)
гипсовая
Coefficient of thermal conductivity, W/mАC
не более 0,18
Compressive/bending strength, after 7 days, at least
2/1.0
Consumption at a layer of 10mm, kg/m2
8
Maximum fraction (filler), mm
1,25
Radiation safety class
1
Time of full strength gain, days
7
Time of subsequent finishing after laying, days
2-4
Viability, minutes
90
Water consumption per 1 kg of the mixture, l
0,5-0,6
Water resistance
да
Water-holding capacity, %
не менее 95
No reviews found